Career Escape
Moving from industrial machinery mechanic to electrical and electronics repairers, commercial and industrial equipment, by the occupational data
Both occupations are described by the same O*NET 30.3 rating system, which makes them directly comparable: the same requirements, rated for each. What follows is that comparison for industrial machinery mechanics and Electrical and Electronics Repairers, Commercial and Industrial Equipment, not an opinion about whether the move is a good idea.
Can an industrial machinery mechanic become an electrical and electronics repairers, commercial and industrial equipment?
Industrial machinery mechanics and electrical and electronics repairers, commercial and industrial equipments share more of their rated requirements than they differ on: O*NET 30.3 marks 82% of everything important to either occupation as important to both. The requirements that carry across include Repairing and Maintaining Electronic Equipment, Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment, Design. Both sit at O*NET Job Zone 3, so the typical education, training and experience expected is the band you are already in. BLS does not publish a typical entry-education category for one of these occupations. What would be new concentrates in work activities: Coaching and Developing Others, Developing Objectives and Strategies, Judging the Qualities of Objects, Services, or People. BLS puts the 2025 national median wage for electrical and electronics repairers, commercial and industrial equipments at $74,090 against $64,520 for industrial machinery mechanics, a difference of 15% upward at the occupational level rather than for any individual move. BLS projects employment in the destination occupation to grow 0.3% between 2025 and 2035, with about 4,700 openings a year on average. O*NET describes the destination as follows: Repair, test, adjust, or install electronic equipment, such as industrial controls, transmitters, and antennas. This compares two occupations, not two people, and says nothing about whether any individual would be hired.
- Weighted overlap
- 82% of the requirements important to either occupation are important to both, with 4 of those shared requirements classed as distinctive rather than near-universal.
- Preparation level
- O*NET Job Zone 3, against Job Zone 3 for industrial machinery mechanics. Not published.
- Typical entry education (BLS)
- Not published by BLS for this occupation.
- Prior experience typically expected
- Not published by BLS for this occupation.
- Where the overlap is strongest
- Transferable skills, with 3 distinctive requirements important to both. Requirements that carry over include Repairing and Maintaining Electronic Equipment, Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment, Design.
- Independent corroboration
- O*NET does not list this as directly related to the source occupation; it appears one step out, related to a related occupation. The overlap measure and the relatedness file disagree here, and both are shown rather than one being quietly dropped.
Source and method
O*NET 30.3 Database, with BLS Employment Projections Table 5.4. Verified 2026-09-02. Importance ratings, Job Zones and occupational titles are read from O*NET. Typical entry education, prior experience and on-the-job training are read from BLS. The weighted overlap percentage, the distinctive-requirement counts, and the shared and new requirement lists are computed by RoleSprint from those inputs using the method published at /career-change/methodology.
Career transition data
Industrial Machinery Mechanic to Electrical and Electronics Repairers, Commercial and Industrial Equipment
- Work activities overlapderived
- 78%
- Knowledge overlapderived
- 79%
- Transferable skills overlapderived
- 90%
- Essential skills overlapderived
- 59%
- Job Zone
- 3 to 3 (no change)
- Median annual wage, 2025
- $64,520 to $74,090
- Wage differencederived
- +$9,570 (+15%)
- Projected employment change, 2025–35
- +0.3%
- Annual openings, 2025–35 average
- 4,700
Largest transferable capability: Repairing and Maintaining Electronic Equipment
Largest new demand: Customer and Personal Service
Source. Job Zone and requirement ratings: O*NET 30.3. Wage, employment projections, openings and entry education: BLS Employment Projections Table 1.2, projections 2025–35, wage year 2025. RoleSprint-derived. Overlap percentages and the wage difference are calculated by RoleSprint from those published values. Limitation. These are national occupational statistics for two occupations. The wage figure is not a salary you would be offered, employment growth is not job security, and overlap is not a likelihood of being hired. Fields BLS does not publish for an occupation are omitted rather than estimated.
What carries over
Requirements O*NET rates as important for both industrial machinery mechanics and electrical and electronics repairers, commercial and industrial equipments, by domain. Most distinctive first, so the top of each list is the part that is actually worth putting on a resume.
Work activities
24 of 29 work activities important to either occupation are important to both.
- Repairing and Maintaining Electronic Equipment3.1 for industrial machinery mechanics, 4.4 here
- Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment3.2 for industrial machinery mechanics, 3.3 here
- Repairing and Maintaining Mechanical Equipment4.1 for industrial machinery mechanics, 3.7 here
- Controlling Machines and Processes3.8 for industrial machinery mechanics, 3.7 here
- Handling and Moving Objects3.6 for industrial machinery mechanics, 3.5 here
Knowledge
7 of 10 knowledge areas important to either occupation are important to both.
- Design3.3 for industrial machinery mechanics, 3.3 here
- Production and Processing3.4 for industrial machinery mechanics, 3.9 here
- Engineering and Technology3.3 for industrial machinery mechanics, 3.5 here
- Mechanical4.3 for industrial machinery mechanics, 4.1 here
- Computers and Electronics3.0 for industrial machinery mechanics, 4.2 here
Transferable skills
10 of 13 transferable skills important to either occupation are important to both.
- Equipment Selection3.1 for industrial machinery mechanics, 3.1 here
- Repairing4.0 for industrial machinery mechanics, 3.9 here
- Equipment Maintenance4.0 for industrial machinery mechanics, 3.8 here
- Troubleshooting4.0 for industrial machinery mechanics, 3.8 here
- Quality Control Analysis3.8 for industrial machinery mechanics, 3.8 here
Essential skills
5 of 7 essential skills important to either occupation are important to both.
- Active Learning3.1 for industrial machinery mechanics, 3.0 here
- Monitoring3.1 for industrial machinery mechanics, 3.1 here
- Critical Thinking3.6 for industrial machinery mechanics, 3.8 here
- Speaking3.0 for industrial machinery mechanics, 3.1 here
- Active Listening3.1 for industrial machinery mechanics, 3.1 here
Numbers are O*NET Importance, on a 1 to 5 scale. A requirement counts as important at 3.0 and above, which is the threshold the whole comparison uses.
What would be new
Requirements important for electrical and electronics repairers, commercial and industrial equipments and not important for industrial machinery mechanics. This is the part you would have to be able to evidence, and it is usually the real obstacle rather than the job title.
Work activities
3 work activities rated important here and not for industrial machinery mechanics.
- Coaching and Developing Others3.1 here, 3.0 for industrial machinery mechanics
- Developing Objectives and Strategies3.0 here, 3.0 for industrial machinery mechanics
- Judging the Qualities of Objects, Services, or People3.5 here, 3.0 for industrial machinery mechanics
Knowledge
3 knowledge areas rated important here and not for industrial machinery mechanics.
- Administration and Management3.5 here, 2.5 for industrial machinery mechanics
- Education and Training3.1 here, 2.8 for industrial machinery mechanics
- Customer and Personal Service3.7 here, 2.3 for industrial machinery mechanics
Transferable skills
2 transferable skills rated important here and not for industrial machinery mechanics.
- Systems Analysis3.0 here, 2.9 for industrial machinery mechanics
- Social Perceptiveness3.0 here, 2.8 for industrial machinery mechanics
Essential skills
2 essential skills rated important here and not for industrial machinery mechanics.
- Writing3.0 here, 2.8 for industrial machinery mechanics
- Reading Comprehension3.1 here, 2.9 for industrial machinery mechanics
Practical caveats for this move
Specific to this pair, and worth reading before treating any of the above as a plan.
- Electrical and Electronics Repairers, Commercial and Industrial Equipment sits at the same Job Zone as industrial machinery mechanics, so the typical preparation band does not change. That removes one obstacle and none of the others.
- BLS records no prior experience in a related occupation as typical for this role, which makes the requirement lists above the more useful guide to what a posting will ask for.
- O*NET does not list this destination as directly related to your current occupation. It reached this map through the requirement overlap, one step out. That is a weaker corroboration than a directly related occupation, and it is shown rather than hidden.
- None of this accounts for licensing, geography, pay, hiring volume, or whether you would want the work. Occupational data describes the job. It does not describe the market for it, and it does not describe you.
How this move compares with the alternatives
This page is one move. The Opportunity Atlas puts every destination mapped from industrial machinery mechanics side by side on skills overlap, day-to-day work, wage, projected growth, openings and the size of the training step.
It does not rank them, because the dimensions genuinely disagree: measured across every transition published here, how much your skills carry over and how much your knowledge carries over are close to unrelated. You choose which one matters and it orders by that.
Compare the alternatives in the Opportunity AtlasThe destination occupation, as O*NET describes it
Repair, test, adjust, or install electronic equipment, such as industrial controls, transmitters, and antennas.
O*NET-SOC 49-2094.00. Full title: Electrical and Electronics Repairers, Commercial and Industrial Equipment. Where this page uses the shorter phrase “electrical and electronics repairers, commercial and industrial equipment”, that is a common name for readability, not a separate occupational classification.
This page includes information from the O*NET 30.3 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. RoleSprint has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications. Analysis generated 2026-09-02 from the O*NET 30.3 Database. Entry education, work experience, and on-the-job training are reproduced from BLS Employment Projections Table 5.4, Education and training assignments by detailed occupation, 2024, published by the U.S. Bureau of Labor Statistics.
What to do next
Occupational data compares two jobs. It cannot tell you whether one specific employer would consider you, and this is the point where most people stop reading data and start applying blind.