Career Escape
Moving from electrician to maintenance technician, by the occupational data
Both occupations are described by the same O*NET 30.3 rating system, which makes them directly comparable: the same requirements, rated for each. What follows is that comparison for electricians and Maintenance and Repair Workers, General, not an opinion about whether the move is a good idea.
Can an electrician become a maintenance technician?
Electricians and maintenance technicians share more of their rated requirements than they differ on: O*NET 30.3 marks 71% of everything important to either occupation as important to both. The requirements that carry across include Repairing and Maintaining Electronic Equipment, Repairing and Maintaining Mechanical Equipment, Building and Construction. Both sit at O*NET Job Zone 3, so the typical education, training and experience expected is the band you are already in. BLS assigns both occupations the same typical entry education, high school diploma or equivalent. What would be new concentrates in knowledge: Production and Processing, English Language. BLS puts the 2025 national median wage for maintenance technicians at $49,590 against $63,190 for electricians, a difference of 22% downward at the occupational level rather than for any individual move. BLS projects employment in the destination occupation to grow 4.2% between 2025 and 2035, with about 148,700 openings a year on average. O*NET describes the destination as follows: Perform work involving the skills of two or more maintenance or craft occupations to keep machines, mechanical equipment, or the structure of a building in repair. This compares two occupations, not two people, and says nothing about whether any individual would be hired.
- Weighted overlap
- 71% of the requirements important to either occupation are important to both, with 6 of those shared requirements classed as distinctive rather than near-universal.
- Preparation level
- O*NET Job Zone 3, against Job Zone 3 for electricians. No additional education typically expected.
- Typical entry education (BLS)
- High school diploma or equivalent, against High school diploma or equivalent for electricians.
- Prior experience typically expected
- None, plus moderate-term on-the-job training as the typical on-the-job training category.
- Where the overlap is strongest
- Transferable skills, with 4 distinctive requirements important to both. Requirements that carry over include Repairing and Maintaining Electronic Equipment, Repairing and Maintaining Mechanical Equipment, Building and Construction.
- Independent corroboration
- O*NET separately lists this occupation as directly related to 1 of the occupations in this source set, which is a signal independent of the overlap measure.
Source and method
O*NET 30.3 Database, with BLS Employment Projections Table 5.4. Verified 2026-09-02. Importance ratings, Job Zones and occupational titles are read from O*NET. Typical entry education, prior experience and on-the-job training are read from BLS. The weighted overlap percentage, the distinctive-requirement counts, and the shared and new requirement lists are computed by RoleSprint from those inputs using the method published at /career-change/methodology.
Career transition data
Electrician to Maintenance and Repair Workers, General
- Work activities overlapderived
- 74%
- Knowledge overlapderived
- 48%
- Transferable skills overlapderived
- 84%
- Essential skills overlapderived
- 29%
- Job Zone
- 3 to 3 (no change)
- Median annual wage, 2025
- $63,190 to $49,590
- Wage differencederived
- −$13,600 (−22%)
- Projected employment change, 2025–35
- +4.2%
- Annual openings, 2025–35 average
- 148,700
- Typical entry education
- High school diploma or equivalent
Largest transferable capability: Repairing and Maintaining Mechanical Equipment
Largest new demand: English Language
Source. Job Zone and requirement ratings: O*NET 30.3. Wage, employment projections, openings and entry education: BLS Employment Projections Table 1.2, projections 2025–35, wage year 2025. RoleSprint-derived. Overlap percentages and the wage difference are calculated by RoleSprint from those published values. Limitation. These are national occupational statistics for two occupations. The wage figure is not a salary you would be offered, employment growth is not job security, and overlap is not a likelihood of being hired. Fields BLS does not publish for an occupation are omitted rather than estimated.
What carries over
Requirements O*NET rates as important for both electricians and maintenance technicians, by domain. Most distinctive first, so the top of each list is the part that is actually worth putting on a resume.
Work activities
29 of 36 work activities important to either occupation are important to both.
- Repairing and Maintaining Electronic Equipment3.5 for electricians, 3.9 here
- Repairing and Maintaining Mechanical Equipment3.6 for electricians, 4.3 here
- Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment3.5 for electricians, 3.3 here
- Operating Vehicles, Mechanized Devices, or Equipment4.0 for electricians, 4.2 here
- Controlling Machines and Processes3.2 for electricians, 4.1 here
Knowledge
3 of 8 knowledge areas important to either occupation are important to both.
- Building and Construction3.7 for electricians, 3.7 here
- Mechanical3.4 for electricians, 4.0 here
- Mathematics3.4 for electricians, 3.4 here
Transferable skills
12 of 16 transferable skills important to either occupation are important to both.
- Installation3.3 for electricians, 3.0 here
- Equipment Selection3.0 for electricians, 3.0 here
- Repairing3.5 for electricians, 3.9 here
- Equipment Maintenance3.0 for electricians, 3.9 here
- Troubleshooting4.0 for electricians, 3.8 here
Essential skills
6 of 9 essential skills important to either occupation are important to both.
- Active Learning3.3 for electricians, 3.1 here
- Reading Comprehension3.1 for electricians, 3.0 here
- Monitoring3.1 for electricians, 3.1 here
- Critical Thinking3.4 for electricians, 3.3 here
- Speaking3.4 for electricians, 3.0 here
Numbers are O*NET Importance, on a 1 to 5 scale. A requirement counts as important at 3.0 and above, which is the threshold the whole comparison uses.
What would be new
Requirements important for maintenance technicians and not important for electricians. This is the part you would have to be able to evidence, and it is usually the real obstacle rather than the job title.
Work activities
1 work activities rated important here and not for electricians.
- Working with Computers3.4 here, 2.4 for electricians
Knowledge
2 knowledge areas rated important here and not for electricians.
- Production and Processing3.1 here, 2.5 for electricians
- English Language3.7 here, 2.6 for electricians
Practical caveats for this move
Specific to this pair, and worth reading before treating any of the above as a plan.
- Maintenance and Repair Workers, General sits at the same Job Zone as electricians, so the typical preparation band does not change. That removes one obstacle and none of the others.
- BLS records no prior experience in a related occupation as typical for this role, which makes the requirement lists above the more useful guide to what a posting will ask for.
- O*NET independently lists this as a related occupation, so two separate parts of the dataset agree that the work is adjacent.
- None of this accounts for licensing, geography, pay, hiring volume, or whether you would want the work. Occupational data describes the job. It does not describe the market for it, and it does not describe you.
How this move compares with the alternatives
This page is one move. The Opportunity Atlas puts every destination mapped from electricians side by side on skills overlap, day-to-day work, wage, projected growth, openings and the size of the training step.
It does not rank them, because the dimensions genuinely disagree: measured across every transition published here, how much your skills carry over and how much your knowledge carries over are close to unrelated. You choose which one matters and it orders by that.
Compare the alternatives in the Opportunity AtlasThe destination occupation, as O*NET describes it
Perform work involving the skills of two or more maintenance or craft occupations to keep machines, mechanical equipment, or the structure of a building in repair. Duties may involve pipe fitting; HVAC maintenance; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs.
O*NET-SOC 49-9071.00. Full title: Maintenance and Repair Workers, General. Where this page uses the shorter phrase “maintenance technician”, that is a common name for readability, not a separate occupational classification.
This page includes information from the O*NET 30.3 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET® is a trademark of USDOL/ETA. RoleSprint has modified all or some of this information. USDOL/ETA has not approved, endorsed, or tested these modifications. Analysis generated 2026-09-02 from the O*NET 30.3 Database. Entry education, work experience, and on-the-job training are reproduced from BLS Employment Projections Table 5.4, Education and training assignments by detailed occupation, 2024, published by the U.S. Bureau of Labor Statistics.
What to do next
Occupational data compares two jobs. It cannot tell you whether one specific employer would consider you, and this is the point where most people stop reading data and start applying blind.